Industrial Balls - EPCO Industrial Ball Specifications

EPCO INDUSTRIAL BALL SPECIFICATIONS

Parteck "C" Series
Thermoset Resin

	Diameter:	±.005
	Sphericity:	TIR .003
	Finish:	Satin or Gloss
	Color:	Black is standard Custom color matching available
	Hardness:	86 - 90 D
	Flexural Strength:	77° F PSI 12,000 - 14,000
	Tensil Strength:	77° PSI 8,5000 - 10,000
	Izod Impact:	Ft. lb./in.notch .25
	H.D.T.:	160 °F
	Specific Gravity:	1.2 to 1.75

Note: The above are minimum specifications. Hardness, impact, and HDT increase as density increases.

The above information is supplied for informational purposes. Suitability for use to be determined by purchaser relevant to applications.

Partek "HW" Series
Thermoset Resin

	Diameter:	±.005
	Sphericity:	TIR .003
	Finish:	Satin or Gloss
	Color:	Black is standard Custom color matching available
	Hardness:	86 - 90 D
	Flexural Strength:	77° F PSI 12,000 - 14,000
	Tensil Strength:	77° PSI 8,500 - 10,000
	Izod Impact:	Ft. lb./in.notch .25
	H.D.T.:	160 °F
	Specific Gravity:	1.75

Note: The above are minimum specifications. Hardness, impact, and HDT increase as density increases.

The above information is supplied for informational purposes. Suitability for use to be determined by purchaser relevant to applications.

Partek "60" Series
Mineral Filled Theromset Terapthalic Resin

	Diameter:	±.002
	Sphericity:	TIR .002
	Finish:	Satin or Gloss
	Color:	Black is standard Custom color matching available
	Hardness:	86 - 90 D
	Flexural Strength:	77° F PSI 20,000
	Tensil Strength:	77° F PSI 10,000
	Compressive Strength:	77° F PSI 21,000
	Izod Impact:	.3
	H.D.T.:	°F 225+
	Density:	1.47

The above information is supplied for informational purposes. Suitability for use to be determined by purchaser relevant to applications.